AMI UCNST202 Mounted Units & Inserts

Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Number of Bearings:Single; Type:Bearings with Housin; Number of Bearings:Single; C Chamfered:Not Provided; Holder Surface Treatment:Black Oxide Coating; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; Volume Discount:

Type:Ball; Load Direction:Radial; d:9; B:6; Volume Discount:Available; Revolution Frequency (Grease)(rpm):34000; Retainer Type:Punching; Retainer Type:Punching; Load Direction:Radial; Size Standards:Metric System;

Bearing Unit, Type:Pillow Type; Unit Body Material:Cast Iron; Surface Treatment:No; Lubrication method:Oil Supply Type; Unit Body Material:Cast Iron; Rolling Element Material:Steel; Unit, Type:Bearing unit; Pillow Type, Category:Standard; d:90; Basic Dynamic Load Rating Cr(N):96000;

Note:This product line wa; Dimension A:6.2 in; Dimension D:9.0 in; Dimension W:1.2 in; Dimension B:6.0 in; Dimension H:1.6 in; Dimension N:10.5 in; Ca - Axial Load Rating:1978 lbf; Tensioning Unit Type:Tension Type; Cr - Dynamic Load Rating:37768 lbf;

Outside Diameter D:170.000 mm; Snap Ring Diameter D2 max:182.900 mm; Weight:3.60 Kg; Clearance:C3; Oil Reference Speed:7500 rpm; Radius Rs min:2.100 mm; Snap Ring Width f max:3.100 mm; Bore Size d:80 mm; Grease Reference Speed:5200 rpm; C0r - Static Load Rating:86.5 kN;

Dimension H1:3.5 in; Dimension L:50.0 in; Dimension H:20.000 in; Bolt Size:8 x M48; Dimension H2:42.3 in; Dimension J1:39.0 in; Cr - Dynamic Load Rating:805266 lbf; Maximum Speed:360 rpm; Shipping Weight:4086 lb; Series Type:Heavy Series;

L1:139.00 mm; D3:195 mm; Lockwasher and Lockplates:MB30; G:M150x2; Appropriate Hydraulic Nut:HMV30; d1:5.250 in; C:26 mm; Locknut:KM30; Weight:6.8 Kg;

Cor - Static Load Rating:180072 lbf; Series Type:Heavy Series; Shaft Size:110 mm; Dimension H2:16.7 in; Shipping Weight:499 lb; Maximum Speed:1640 rpm; Dimension H:7.756 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension M:6.5 in; Bearing Type:Split Cylindrical Ex;

Dimension F:20.25 in; Dimension RVV:1.24 in; Weight:136 lb; C0 - Static Load:212000 lb; Grease Lubrication - T Seal:1000 rpm; Oil Lubrication - M/N Seal:700 rpm; Pre Install Clearance Max:0.0067 in; Oil Lubrication - B/C/O Seal:400 rpm; Shaft Size Type:Imperial; Dimension B:11.15 in;

C0:29.2 kN; S:12 mm; d1:74.5 mm; L:130 mm; s1:36.95 mm; T min.:-20 °C; H:219 mm; A:43 mm; Designation of bearing:ES211G2; Designation of open end cover:SCOE211-55;

T max.:100 °C; Designation of housing:F209N-; d:45 mm; Z:56.3 mm; Designation of bearing:LK209G2H; A:38 mm; Weight:2.04 kg; A1:16 mm; J:105 mm; B1:38 mm;

Format symbol:NF (one brim for the; Symbol of Bearing Ring Shape:No symbol: Internal; Basic Load Rating, Dynamic Rating(N):106000; Outer ring oil hole:Standard; D:140; Holder Symbol:No; Days to Ship:9 Days or more; Load Direction:Radial; Combination of two pieces:Standard; Internal Clearance Symbol:

Max operating temperature, Tmax:120 °C; Rating life coefficient, A2:1.9; Fatigue limit load, Cu:10.6 kN; Characteristic rolling element frequency, BSF:13.77 Hz; r1a max:1.5 mm; d1:104.5 mm; D:121.44 mm; Min operating temperature, Tmin:-40 °C; Mass:0.45 kg; Dynamic load, C:56.5 kN;

Type:Bearings with Housin; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Width T(mm):21; Seals:VV (Non-Contact Rubb; Days to Ship:7 Days; Bearing Retained:Yes (with retaining; Flange Shape:Round Type; Bearing Part Number:6001; Bearing Material:[Steel] Steel;

Number of Bearings:Double; Shape:T-Shaped; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; C Chamfered:Not Provided; Height H(mm):20 ～ 40; Shape:T-Shaped; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Housing Material:[Aluminum Alloy] Alu;